CLICK ON EACH CERAM-KOTE PRODUCT NAME BELOW TO SEE A MORE DETAILED USE AND APPLICATIONS FOR EACH PRODUCT. TO GET OUT OF THE PRODUCT PAGES, USE THE NAVIGATIONAL BAR ON YOUR LEFT.

For use in the toughest environments to protect expensive equipment. Excellent corrosion barrier, high adhesion, low permeability, sliding abrasion resistance, high surface lubricity, flexible, and is a fast, one-coat, two pass spray application. No primer needed

CeRam-Kote 54 SST® has been formulated to  be applied over marginally prepared substrates and rusty steel surfaces.  It can be used over itself or as a primer under high performance topcoats, or as a barrier coat or universal primer.  CeRam-Kote 54 SST offers outstanding adhesion even if the substrate isn’t blasted!  It is tolerant of moist/damp surfaces and suitable for use in USDA inspected facilities.

Chemical resistant novalac ceramic/epoxy coating recommended for critical service. A derivative of CeRam-Kote 54®, CeRam-Kote 2000 is highly crosslinked to perform well in a variety of aggressive immersion service environments. Fast, one-coat, two pass spray application. No primer needed.

CeRam-Kote 2000TL is a thin-film, spray-applied and air-dried ceramic novalac epoxy coating system engineered to provide excellent acid immersion service protection to all metals, fiberglass reinforced plastics, concrete and plastic substrata. CeRam-Kote 2000TL is highly cross-linked to provide superior chemical resistance.  The product may be force-cured with heat for enhanced performance in extremely harsh environments. 

Thin-film, spray-applied and air-cured ceramic epoxy coating system recommended for atmospheric corrosion/light abrasion resistance as well as non-chemical immersion service in a marine environment.

CeRam-Kote 60 / CeRam-Thane 200 System - Two-coat system is specifically engineered to provide atmospheric corrosion control where UV protection and cosmetics are important

Recommended for atmosphneric corrosion/light abrasion resistance as well as non-chemical immersion service. Not designed for critical service areas of high abrasion, heavy impact and/or chemical service. Fast, one-coat, two pass spray application. No primer needed.

Thin-film, spray applied and air-cured ceramic epoxy coating system recommended for use where water spotting is a problem. Not designed for critical service, areas of high abrasion/heavy impact and/or chemical resistance.

Thin-film, spray applied and air-cured epoxy coating system recommended for use as a protective coating for recreational and industrial pools.

Advanced ceramic/epoxy grouting material designed to handle the toughest corrosion pitting problems in steel and the most difficult cracking and spalling problems in concrete. Non-shrinking high build material resists thermal and mechanical shock. One-pass application.

Ceramic/epoxy SPRAYABLE grout designed to be a high-build corrosion barrier. As a zero VOC, two-component, 100% solids-by-volume coating, CeRam-Kote SPG provides a non-shrinking surface after application.

Advanced 100% solids ceramic/epoxy material designed to be trowel- or squeegee-applied on floors. Ideal for secondary containment applications. Non-shrinking high build material resists thermal and mechanical shock. One-coat application. Available in grey or off-white

Technically advanced ceramic 100% novolac epoxy material designed as a high-build corrosion barrier. Ideal as a brushed or rolled application which levels out to a very smooth surface with no shrinkage.